Note: If you're planning to encode many videos and build have large video library on your website, it's recommended to use a service which combines video encoding and hosting in one package.
FV Player supports wide range of video encoding and hosting services and the most popular amongst them are Vimeo and Amazon MediaConvert.
- Basic Principles of Encoding Video for the Web
- Recommended codecs
- Ogg video
- MP4 and metadata
- MP4 for iOS and mobile devices
- Encoding software
- More about Video Formats
- Which videos should be re-encoded
Basic Principles of Encoding Video for the Web
When encoding for the web, you always remain reliant on both the outgoing bandwidth of your server and the incoming speed of your viewer's internet connection. The smaller you can make your files, the higher are your chances for smooth playback.
Aiming for perfect playback quality can result only in a choppy video. The first place to cut back on file size is resolution. The less pixels you have to compress, the smaller file you get. Once you pick the right target size, the next big hurdle is bitrate. Bitrate is the number of bits transmitted in a set length of time. You want to set bitrate as low as possible while maintaining quality.
In this guide we try to find a good compromise between the video quality and the video size (or bitrate).
The resolution which we pick is 960px x 540px (or 540p). It's better looking than 360p or 480p, but faster to load than 720p and 1080p.
- What bitrate to use depends on content and duration of video. High motion scenes require much higher bitrates not to tear. VBR (Variable Bit Rate) was designed to deal with these issues. VBR takes longer to encode, but produces cleaner results.
- On the other hand, do not use Variable Frame Rate. It will break your video on most devices or platforms. Always choose Constant Frame Rate.
- You can't use interlaced video. If the input video is interlaced, apply a deinterlace filter prior to encoding.
- If the input video does not use square pixels (pixel aspect ratio of 1/1), apply a filter enforcing square pixels (pixel aspect ratio of 1/1).
- Use multi-pass (2-pass) encoding to get better quality maintaining low bitrate.
If your original video has an aspect ratio of 16/9, keeping the above caveats in mind you could encode to:
- a resolution of 960x540 pixels
- an average video bitrate between 1500 and 4000 kilobits per second
- an average audio bitrate between 96 and 192 kilobits per second
To get your video looking its best on the web, you'll need to experiment with encoding settings until you get it right for your particular material. Create short clips with different encoding settings of your source material to find the one that seems the best to you. At the bottom of the article, we'll give you some screenshots of what we consider to be good settings for Handbrake. You can use them for other software as well.
MP4, WebM and Ogg are the containers for the following video and audio codecs:
|Container||video codec||audio codec|
|MP4||H.264 aka MPEG-4 AVC or MPEG-4 Part 10||AAC|
We did not cover the MPEG-4 Visual or MPEG-4 Part 2 video codec because it is not suitable for Flash fallback, and will also not play in Internet Explorer in HTML5 mode. To avoid playback failures, encode to the more modern MPEG-4 AVC.
Not required, unless you happen to have users using outdated (3+ years not updated) Firefox or Opera browser, however, such browsers support fallback to MP4 playback in Flash mode, and in that case either WebM or MP4 will play better.
Hint: such people are probably not watching much video on the web and have other browsers or flash for that. If you still need/wish to use Ogg, no problem, FV Player plays Ogg perfectly.
MP4 and metadata
H.264 encoded videos carry their metadata - duration, frame rate etc. - in the so called "moov atom".
By default encoding programs will insert the moov atom at the end of the video file which is suitable for playback of a local file in a desktop program. However, any kind of progressive download requires the metadata to be available right away for immediate playback. Otherwise the player has to wait for the entire video to be downloaded before playback starts.
Make sure to select an option in your transcoding software which puts the moov atom at the beginning of the file!
MP4 for iOS and mobile devices
MPEG-4 AVC is a powerful codec which allows very effective compression at various profiles and levels. As higher profiles and levels are decoding intensive, they are not supported by mobile devices to ease their processor workload.
Let's take iOS as an example: Even the latest iPads play videos encoded at H.264 Baseline Level 3.1. But if you want to cater for the widest audience including viewers with iPhones and iPods and iPad generation 1 as well as older iOS versions you should stick with:
- High Profile
- Level 3.0
- 1 reference frame
- Maximum bitrate limited to 1.5 times the average bitrate, but not over 10000 kilobits per second.
- Buffer size of 5 times the maximum bitrate, but not over 10000 kilobits.
- Maximum resolution of 960x540 px
While much of the best free software is based on the open source FFmpeg program, we recommend using a graphical frontend for FFmpeg, like Handbrake (Windows, Linux, OS X) or ffmpegX (for OS X, up to version 10.7 - OS X Lion). There are high-priced transcoding programs around which are often very capable, but which you probably don't need for basic web encoding.
Here are some screenshots with recommended settings
MP4 encoding sample
Then open the Dimensions tab.
Then click on the Video tab and fill in following settings.
These settings play perfectly on iPads, as well as on most Android and Apple smartphones. They look good on desktop too.
(Note: If you want to optimise your video for older devices even more, you can switch Profile to baseline instead of high)
You can save substantial space and get a faster start by lowering the bitrate, but if you do so, picture quality degenerates rapidly. Profile High and H.264 Level 4 give better looking video at lower bitrates but will be very choppy on older/weaker Android phones or older iOS devices (iPhone 3GS, iPad 1). The settings above are the safe ones for a single codec across different devices.
If you want your video to look best in full-screen, use 1920x1080 pixel resolution and change the "Average Bitrate (kbps)" from 5000 to 8000. You can use slightly lower numbers if your video seems to be of lower quality after applying those settings. In that case make sure you follow the mobile video recommendations. Whatever template you choose, always remember to check the box Web optimized, so the output file has proper meta data.
Pay attention to audio tab too. Set it to use AAC instead of Auto Passthrough, otherwise the audio stream will not be re-encoded, and your video might not play in Internet Explorer and Firefox on Linux.
If you see multiple streams, make sure only one stream stays!
Although, most nowadays mobile devices does support high resolution video, the key is to stick to exact opposite. Most mobile users will play your videos using mobile connection, so the best way is to sacrifice video quality and focus on lower bandwidth and faster loading. Here are the numbers:
- First, you need to encode your video for mobile:
- in the lower resolution and lower bandwidth (you can just set the width to 480px to make it load faster on mobile connection)
- make sure you use the "baseline" h264 profile
- Use the Mobile video field in the shortcode editor of our plugin. Turn that field on at Settings -> FV Player -> Post Interface Options, select Mobile video and click Save All Changes.
- That video will be served for each device with screen width lower than or equal to 320px and height lower than or equal to 480px. Even if the screen size of later iPhones is 640x960px, its true size is calculated as 320x480px, because it is the so called "retina" display.
With quality switching you can add multiple video qualities and you users can freely switch between them.
More about Video Formats
Currently 3 major video formats are used on the web.
- MP4 gives complete cross browser support with the aid of Flash
- WebM gives HTML5 video support for the latest Firefox, Chrome and Opera browsers
- OGG gives HTML5 video support for older versions of Firefox and Opera
Taken from Wikipedia.
*Opera can play MP4 videos if the hosting operating system has the appropriate codec installed.
By default FV Player attempts to use HTML5 video, if it is not supported, then Flash (9.0+) and MP4 is used. MP4 is enough for complete browser support, but providing WebM and/or OGG video gives you broader support for HTML5 video which is the preferred technology. Also note that Flash does not support byte-range requests, therefore random seeking will not work with MP4 in Flash mode.
Note that browser support of video formats is subject to change - Chrome is planning to remove MP4 support, and Firefox is planning to add MP4 support. Your best bet for reliable HTML5 video is to provide MP4 and WebM variants for each of your videos.
Safari on Windows is capable to play HTML5 video, more exactly MP4, if the latest QuickTime package is installed. However, Apple has discontinued the development and support of Safari for Windows. The latest version available for download is 5.7.1.
Which videos should be re-encoded for best compatibility with HTML5?
AVI format is not supported by neither HTML5 nor Flash.
This format plays only on Flash-compatible devices. Make sure you include another version of the video in MP4 format for all the iOS devices and other people without Flash.
Since MOV format is not officially supported by HTML5, we recommend that you re-encode these videos into MP4.
MOV contains sometimes codec combinations that are not supported across all browsers. Plays well on Apple computers by default, but on Windows computers QuickTime codec might be required to be installed by the user. Make sure you include another version of your video in MP4 and/or WebM format.
RTMP is not a format, but a protocol for effective video streaming of Flash video. It only works on Flash-compatible devices. Make sure you include another version of your video in MP4 format for all the iOS devices and other people without Flash.
This is a special case - it probably will play on iDevices, but won't play in general computer browsers if Flash is not installed, except for Safari.
These files work only and exclusively in Internet Explorer, because it loads the Windows Media Player object which is incompatible with any other browser. Silverlight can be used to embed WMV for other browsers, but not on Android devices. We recommend to encode your video into MP4 with h264 video codec.
Chrome on Windows might is able to play it, but not the other browsers. Better to get rid of it.